Stockwork

 
Semi-inletted stock with deluxe finish and a grind-to-fit recoil pad.
Any stock inletting done by hourly rate
$35.00/hr.

Finishing of Stocks:

Standard Finish:

Remove old finish, sanded - keeping edges square and sharp, minor dings and scratches removed, pores left unfilled.
3-4 coats of finish applied.
$40-50.00+

Deluxe Finish:

Matte finish, all pores filled, sanded smooth and flat, all but the deepest scratches removed.                                                    
$60-75.00

Gloss finish, the same as matte but polished to a high gloss shine.
$80-120

Action Bedding:

Glass or steel bedding on action - not including materials.
$65-125.00
add $20.00 for acraglass
add 35.00 for steel bed

Checkering:

Recut existing checkering. 
Per Panel: $30.00
Recutting impressed checkering and bringing to full point per panel.
$45-65.00

*Prices subject to change without notice*

IMG_0416.JPG
1903 Springfield fitted to a spalted maple stock blank.
IMG_0417.JPG
IMG_0444.jpg 
1903 Springfield fitted to a spalted maple stock blank and checkered at 32 lines per inch.
Re-cut of Factory Checkering

Re-cut of Factory Checkering

Re-cut of Factory Checkering

Re-cut of Factory Checkering

Completed Factory Re-cut and Assembled

Completed Factory Re-cut and Assembled

Layout and Beginning of a Checkering Pattern

Layout and Beginning of a Checkering Pattern

Checkering Process

Checkering Process

Checkering Process

Checkering Process

Finished Checkering Pattern at 20 Lines per Inch

Finished Checkering Pattern at 20 Lines per Inch

Finished Checkering Pattern at 20 Lines per Inch

Finished Checkering Pattern at 20 Lines per Inch

Finished Checkering Pattern at 20 Lines per Inch

Finished Checkering Pattern at 20 Lines per Inch

Browning Stock Before Checkering is Re-Cut

Browning Stock Before Checkering is Re-Cut

Halfway Through Re-Cutting

Halfway Through Re-Cutting

Recutting Complete; End Result

Recutting Complete; End Result

Before Re-Cutting

Before Re-Cutting

During Re-Cutting

During Re-Cutting

Completed Checkering Re-Cut of Browning Stock

Completed Checkering Re-Cut of Browning Stock

Custom Checkering Pattern on a Ruger 10/22

Custom Checkering Pattern on a Ruger 10/22

Custom Checkering Pattern on a Ruger 10/22

Custom Checkering Pattern on a Ruger 10/22

Custom Checkering Pattern on a Ruger 10/22

Custom Checkering Pattern on a Ruger 10/22

Stock Blank Before

Stock Blank Before

Finished Stock With Handmade Brass Butt-Plate and Grip-Cap

Finished Stock With Handmade Brass Butt-Plate and Grip-Cap

Pressed Factory Checkering Before Re-Cutting

Pressed Factory Checkering Before Re-Cutting

Finished Re-Cutting

Finished Re-Cutting

Finished Re-Cutting

Finished Re-Cutting

Pressed Factory Checkering During Re-Cutting

Pressed Factory Checkering During Re-Cutting